Introduction of assembly of multifunctional care bed

1. The legs of the multifunctional care bed
The longer two are the legs of the multi-functional care bed. First, remove the screws on the legs, clamp the legs on the bed, and then re-fix the screws.
The two shorter ones are beams, which are respectively fixed on the already installed bed legs, and the bed legs are gently shaken without loosening.
2. Install the casters of the multifunctional care bed
The casters are connected by thread, and the four casters can be installed at the four screw holes regardless of their positions.
3. Install the toilet hole of the multifunctional care bed
The bed hole is composed of bed surface bed hole structure, bed pot holder and bed hole handle. The bed pot holder is connected with the bed surface by a transmission rod device, and the bed hole can be opened and closed by controlling the spherical handle. 4. Install the head of the bed
The headboard is higher, the footboard is lower, and the hanging installation method is adopted. Align the bedside hook with the iron pin of the bed help and fasten the lock.
5. Install the guardrail of the multifunctional care bed
Align the hole of the guardrail frame with the punching position of the bed help, fix it with screws, and the guardrail switch is facing the side of the bedside.
6. Debug the controller

The motor and push rod have been installed before leaving the factory. After connecting to the power supply, debugging is carried out through the controller. For specific operations, please refer to the manual or consult the merchant.