Precautions for using multifunctional electric hospital bed

1. Before using the multifunctional electric hospital bed, first check whether the power cord is firmly connected. Whether the controller line is reliable.
2. The wires and power wires of the controller's linear actuator must not be placed between the lifting connecting rod and the upper and lower bed frames, so as to avoid the wires being cut and causing personal equipment accidents.
3. After the backboard is raised, the patient lies down on the panel and is not allowed to push it.
4. People cannot stand on the bed and jump. When the backboard is raised, people are not allowed to push when sitting on the backboard or standing on the bed panel.
5. After the universal wheel is braked, it is not allowed to push and move, and it can only be moved after releasing the brake.
6. It is not allowed to push horizontally to avoid damage to the lifting guardrail.
7. It cannot be pushed on uneven roads to prevent damage to the universal wheels of the electric hospital bed.
8. When using the controller, the buttons on the control panel can only be pressed one by one to complete the action. It is not allowed to press more than two buttons at the same time to operate the bed, so as to avoid misoperation and endanger the safety of patients.
9. When the multifunctional electric hospital bed needs to be moved, the power plug must be unplugged, and the power controller wire must be wound before being allowed to move.

10. When the multifunctional electric hospital bed needs to be moved, the lifting guardrail should be lifted to prevent the patient from falling and being injured during the movement. When the electric bed is moved, two people must operate it at the same time, so as not to lose control of the direction during the promotion process, causing damage to the structural parts and endangering the health of the patient.