How to maintain the three-function home care bed

Three-function home care beds usually refer to care beds that can adjust the head, foot and height of the bed, and are widely used in home care for the elderly, patients or people with limited mobility. The structure of this type of bed is relatively complex, including multiple components such as the electric adjustment system, bed frame, mattress, etc., so correct care and maintenance are particularly important to ensure its long-term use and ensure the safety and comfort of the user. The following are maintenance recommendations for three-function home care beds:

1. Regular cleaning and care

Cleaning the surface of the bed: Use a soft damp cloth to wipe the surface of the bed, and avoid using too much water to prevent moisture from penetrating into the bed and affecting the electric adjustment function.

Mattress cleaning: Stains on the mattress can be cleaned with appropriate detergents.

Avoid moisture: The care bed should be kept away from a humid environment for a long time to prevent metal parts from rusting or electric components from getting damp.

2. Check the electric adjustment system

Electric system maintenance: The adjustment of the three-function home care bed is usually carried out through the electric system, and the operation of the electric adjustment device is checked regularly.

Power cord inspection: Check the power cord and plug regularly to see if they are in good condition to avoid damage to the power cord.

Avoid overload: Avoid overloading the electric system for a long time, rest the electric adjustment system in time, reduce the load of the motor, and extend its service life.

3. Check the bed frame and support parts regularly

Tighten screws and joints: Check the various connection parts of the nursing bed regularly, especially the screws and support frames of the bed frame, to ensure that they are not loose or damaged.

Check the stability of the bed: Check whether the four corners of the bed frame are stable and whether the bed is shaking or loose.

4. Check the bed legs and lifting system regularly

Bed leg inspection: The legs of the nursing bed usually have pulleys or fixings. Check the stability of the bed legs to ensure that there are no foreign objects blocking the pulleys to avoid excessive wear of the pulleys.

Lifting system maintenance: The lifting system of the bed needs to be checked regularly to see if it is smooth, whether there is any abnormal noise or jamming.

5. Pay attention to the maintenance of the mattress

Mattress flipping: Flip the mattress regularly to avoid partial sinking or deformation of the mattress due to being in the same position for a long time.

Remove foreign matter from the mattress: Check the mattress regularly for foreign matter or stains, and clean it in time to keep the mattress clean and hygienic.

Use a mattress protector: Using a mattress protector can effectively extend the life of the mattress, prevent sweat and stains from penetrating into the mattress, and keep the mattress clean.

6. Maintain the battery

If the three-function nursing bed is equipped with a battery backup power supply, it is necessary to check the battery power and condition regularly to avoid the low battery power affecting the normal use of the bed.

Replace the battery: If the battery is aged, swollen or damaged, it should be replaced with a new one in time.

7. Avoid excessive weight

Three-function nursing beds usually have a clear maximum load limit, and this weight range should be avoided when using.

8. Check safety functions regularly

Check the bed rails: If the nursing bed is equipped with bed rails, check the safety of the bed rails regularly to ensure that they are firm and reliable.

Check the angle adjustment of the head and foot of the bed: Confirm whether the angle adjustment function of the head and foot of the bed is smooth and there is no jamming phenomenon to avoid damage to the adjustment electric system.

9. Regular professional maintenance and maintenance

If conditions permit, it is recommended to arrange professional personnel to perform maintenance and inspection every year or every two years to ensure that the bed, electric system, lifting system and other components are in the best condition.

When maintaining a three-function home care bed, be sure to pay attention to weight limits, avoid humid environments, and regularly check the electrical system to ensure its normal operation.