Precautions for safe use of medical beds

1. Before using the multifunctional electric medical bed, first check whether the power cord is firmly connected. Whether the controller line is reliable.
2. The wires and power wires of the linear actuator of the controller shall not be placed between the lifting link and the upper and lower bed frames, so as to avoid the wires being cut and causing personal and equipment accidents.
3. After the back panel is raised, the patient lies on the panel and is not allowed to push.
4. People cannot stand on the bed and jump. When the back panel is raised, people sitting on the back panel and standing on the bed panel are not allowed to push.
5. After the universal wheel is braked, it is not allowed to push or move, and it can only be moved after releasing the brake.
6. It is not allowed to push horizontally to avoid damage to the lifting guardrail.
7. The uneven road surface cannot be implemented to prevent damage to the universal wheel of the multifunctional electric medical bed.
8. When using the controller, the buttons on the control panel can only be pressed one by one to complete the action. It is not allowed to press more than two buttons at the same time to operate the multifunctional electric medical bed, so as to avoid misoperation and endanger the safety of the patient.
9. When the multifunctional electric medical bed needs to be moved, the power plug must be unplugged, and the power controller wire must be wound before it can be pushed.

10. When the multifunctional electric medical bed needs to be moved, the lifting guardrail should be lifted to prevent the patient from falling and being injured during the movement. When the electric bed is moved, two people must operate it at the same time, so as to avoid losing control of the direction during the implementation process, causing damage to the structural parts and endangering the health of the patients.