Maintenance of Electric Wheelchair

Maintenance of electric wheelchair
1. First of all, you must fully understand the device, how to use it, and the functions of the buttons everywhere. Don't buy anything. You can't use it flexibly at critical moments, especially how to start and how to stop quickly. It can play a key role in emergencies. .
2. Keep the car body clean and put it in a dry and ventilated place to prevent the parts from rusting.
3. Before using the wheelchair and within one month, check whether the bolts are loose. If they are loose, they should be tightened in time. In normal use, check every three months to ensure that all parts are in good condition, check all kinds of firm nuts on the wheelchair (especially the fixing nuts of the rear axle), and if they are found to be loose, they need to be adjusted and tightened in time.
4. Please check the tire usage regularly, repair the rotating parts in time, and regularly add a small amount of lubricating oil.
5. Sometimes it is unavoidable to go out with muddy water or get wet by rain. Pay attention to cleaning and wiping the soil in time, and apply anti-rust wax. Rainwater is too acidic. If the soil is not cleaned in time, it is easy for the wheelchair to rust. Visually affect its appearance.
6. The tires should keep sufficient air pressure and should not be in contact with oil and acidic substances to prevent deterioration.
7. The connecting bolts of the wheelchair seat frame are loose connections and are strictly prohibited from tightening.
8. For electric wheelchairs, it is necessary to develop the habit of charging immediately after use, so that the battery power is kept full. Storage without power is prohibited; if the electric wheelchair is not used for a long time, storage without power will seriously affect the service life, and the longer the idle time, the more serious the damage to the battery. Idle electric wheelchairs should develop the habit of charging regularly. Keep the battery in a "full state" for a long time. There are also avoid rain, handle with care and so on.
9. Always check the flexibility of activities and rotating structures, and apply lubricant. If for some reason the axle of the wheel needs to be removed, make sure the nut is tight and not loose when reinstalling.
10. The connecting bolts of the wheelchair seat frame are loose connections and are strictly prohibited from tightening.