Correct Operation Steps of Electric Wheelchair

Correct operation steps of electric wheelchair
Before getting into an electric wheelchair, please check several aspects carefully
1. Whether the electromagnetic brake is in the closed state. Otherwise, the wheelchair will slip back when getting on the wheelchair, causing danger. In addition, the clutch is in the open state, and the electric wheelchair cannot be driven normally;
2. Is the tire pressure normal? When the tire pressure of the electric wheelchair is abnormal, it will deviate when driving, or even unsafe;
3. The power is off. When sitting in an electric wheelchair, make sure that the power is turned off, otherwise accidentally touching the controller joystick will cause a safety accident;
4. The foot pedal must be erected, and it is not allowed to step on the foot pedal to get on and off the wheelchair;
Correct operation methods and steps after sitting in an electric wheelchair
1. Fasten seat belts. Seat belts are redundant most of the time, but good habits must be developed, and safety awareness must be possessed;
2. Put down the pedals and place your feet flat on the pedals; if some elderly people have chronic diseases such as cough and asthma, please put away the pedals when the cough is severe, step on the ground with both feet, or stand State cough is safer;
3. Turn on the power and gently push the controller joystick forward to drive the electric wheelchair forward;
4. Strictly abide by the traffic rules, do not run red lights, do not go to the fast lane;
5. When encountering obstacles or roads with steep slopes, please take a detour or politely ask passers-by to assist in passing, and do not pass without certainty, so as to avoid potential safety hazards.