Safe use of manual electric hospital beds

1. Before using the manual electric hospital bed, you should first check whether the power cord is firmly connected. Is the controller cable secure?
2. The wires and power wires of the linear actuator of the controller shall not be placed between the lifting link and the upper and lower bed frames to avoid the wires being cut and causing personal equipment accidents.
3. After the back panel is raised, the patient should lie down on the panel, and it is forbidden to push.
4. People cannot stand on the bed and jump. When the backboard is raised, people sit on the backboard and stand on the top of the bed, and it is forbidden to push.
5. After the universal wheel is braked, it is forbidden to push and move, and it can only be moved after releasing the brake.
6. It is forbidden to push horizontally to avoid damage to the guardrail.
7. The road surface is uneven and cannot be pushed to prevent damage to the universal wheel of the manual electric hospital bed.
8. When using the controller, the buttons on the control panel can only be pressed one by one to complete the action. It is forbidden to press more than two buttons at the same time to operate the manual electric hospital bed, so as to avoid misoperation and endanger the safety of the patient.
9. When the manual electric hospital bed needs to be moved, it is necessary to unplug the power plug, and only after winding the power controller wire can it be pushed.

10. When the electric turning bed needs to be moved, the raised guardrail should be lifted to prevent the patient from falling and being injured during the movement. When the electric bed is moved, it is necessary for two people to operate together to avoid losing control of the direction during the promotion process, resulting in structural damage and endangering the health of the patients.