How to Use the Home Care Bed

How to use the home care bed
1. The use of the back bed
Rotate the handle clockwise, the back-side bed surface rises, and vice versa, the back-side bed surface descends.
2. Posture adjustment
Hold the head position control handle tightly to release the self-locking of the gas spring, its piston rod extends, and at the same time drives the head position bed surface to rise slowly. Similarly, hold the handle tightly and apply downward force to lower it; the lift of the thigh bed is controlled by the thigh rocker; the lift of the foot bed is controlled by the foot control handle. It is lowered by its own weight, and when it reaches the required angle, the foot bed surface 12 will be locked in this position when the handle is released; the coordinated use of the control handle and the crank handle can enable the patient to obtain from supine to semi-recumbent, bent legs, and flat sitting. , Sitting in various postures.
In addition, if the patient wants to lie on the side in the supine state, first pull out one side of the bed, turn down the side rail, and press the control button on the outside of the bed with one hand to release the self-locking side gas spring. , the piston rod extends, and at the same time drives the side bed surface to rise slowly. When it rises to the required angle, release the control button and the bed surface is locked in this position, and the side lying position is completed from the surface.
3. Use of defecation device
Rotate the defecation rocker clockwise, the toilet hole cover is automatically opened, and the toilet carrier is automatically sent to the patient's buttocks in the horizontal direction, and the patient can defecate or clean the lower part. Stays flush, while the bedpan is automatically delivered to the operator's side so that the caregiver can remove it for cleaning, and the cleaned bedpan is put back into the bedpan carrier for next use.
4. The use of the guardrail of the nursing bed
Hold the top edge of the side guardrail horizontally, lift it up about 20 mm vertically, and turn it down 180 degrees to lower the guardrail. After the patient goes to bed, lift the guardrail up and turn it 180 degrees, and press it vertically to complete the side guardrail raising.
5. The use of living countertops
Align the opening of the plastic part on the back of the living table with the upper side of the side rail and press it down. Press the guardrail with one hand and lift the living table with the other hand to remove it.
6. Use of infusion hanger
No matter the bed surface is in any state, the infusion pole can be used. When using the infusion pole, first twist the two sections of the infusion pole into one, then bend the lower hook of the infusion pole, align the upper horizontal tube, and align the upper hook head at the same time. The round hole of the tube above the side rail can be used by pressing down, and the infusion hanger can be removed by lifting it up.