Home Care Bed Installation Considerations

Home Care Bed Installation Considerations
1. When the left and right rollover function is required, the bed surface must be in a horizontal position. Similarly, when the back bed surface is raised and lowered, the side bed surface must be lowered to a horizontal position.
2. When taking a sitting position to relieve the stool, when using a wheelchair function or washing feet, the back bed surface needs to be raised. Please pay attention to raising the thigh bed surface to an appropriate height before that to prevent the patient from sliding down.
3. Do not drive on rough roads and do not park on slopes.
4. Add a little lubricating oil to the screw nut and pin shaft every year.
5. Please always check the movable pins, screws, and guardrail alignment wires to prevent loosening and falling off.
6. It is strictly forbidden to push or pull the gas spring.
7. For transmission parts such as lead screw, please do not operate with force. If there is a fault, please use it after inspection.
8. When the foot bed surface is raised and lowered, please gently lift the foot bed surface upwards, and then lift the control handle to prevent the handle from being broken.
9. It is strictly forbidden to sit on both ends of the bed.
10. Please use seat belts and children are prohibited from operating. Generally speaking, the warranty period of nursing beds is one year.