ABS Headboard Manual Hospital Bed with Folding Side Rails Manufacturers

Electric hospital beds have certain requirements for materials, mainly considering the following aspects: Stability and durability: Electric hospital beds need to be stable and durable enough to withstand the weight and force of patients moving on the bed. Therefore, high-strength metal materials, such as steel or aluminum alloys, are usually selected to ensure the structural stability of the hospital bed.

1. There is no forward tilting action of the electric medical bed. If there is only no forward tilting action, but other actions are present, it means that the compressor pump is working normally, but the corresponding touch membrane switch is faulty or the corresponding solenoid valve is faulty. There are generally two ways to judge whether the solenoid valve is good or bad. One is to measure the resistance with a three-meter, and the other is to put it on metal to see if there is suction. Of course, if the solenoid valve suction action is normal, and the oil circuit plug will also The above problem occurs. If there is not only no forward tilting action, but also no other actions, that is the failure of the compression pump. First, check whether there is any voltage on the compression pump, and use a three-meter to measure whether the resistance of the compression pump is normal. If the above is normal, the commutation capacitor is generally invalid. .

What materials are generally used in home care beds? The material of the bed frame of the home care bed is generally made of steel pipe. The difference is mainly the difference between the material of the head and the foot of the bed. The materials of the head and foot of the bed are mainly ABS (engineering plastic), particle board, and solid wood.

Baby medical bed is a medical bed designed separately for infants, compared with adult beds, it has a strong and durable, beautiful appearance, just corrosion, easy to clean and other advantages, medical staff should use the baby bed for a certain period of time, to overhaul it, to see if there are potential failure problems, many years of experience we can get to overhaul the common four methods of medical baby beds, the following is the relevant content introduction:

There are many classifications of medical beds, and the specific classification methods are as follows

Electric nursing bed manufacturers believe that with the intensification of global aging, the proportion of elderly people is increasing, and the demand for nursing beds in the elderly care market is also increasing. Multifunctional nursing beds were only used in medical institutions before, but now they are gradually entering nursing homes, home nursing service centers and families. Nursing beds are divided into electric nursing beds, manual nursing beds and ordinary nursing beds, which are used for hospitalization or home care for the elderly or patients with limited mobility. Its main purpose is to facilitate the care of the nursing staff and the rehabilitation of the elderly or the sick.